- A lamp that easily snaps into place wherever you need it
This lamp is part of my bachelor project. With SNAP LAMP I aimed to make it easy to get light where you need it.
The lamp offers a flexible lighting solution with its clamp base that lets you attach it to any surface that ranges from 8-40mm thick. Its simple shape reflects my Scandinavian roots and its attached clamp is integrated into the design for ease.
The shade rotates in two directions so it can be focused where you need light the most. The lamp is outfitted with LED technology and a dimmer function.
- A floor lamp that gives general lighting in a flexible way
This lamp is part of my bachelor project made in collaboration with the danish lifestyle design company Muuto.
The LEAN LIGHT is a movable floor lamp with LED designed to fit into Muuto's lighting category as a new quality LED product.
The need for lighting to be flexible and easy changeable is the basic idea for the development of this lamp. It can be used as generel lighting in a room either as direct light or indirect when angled to throw the light up a wall, ceiling or floor.
- An interior project made for fashion & lifestyle communication agency, NOISE PR. Furthermore it functions as an external showroom for Muuto showcasing broad variety of Muuto setups.
During my internship at Muuto I made this interior project in collaboration with Design assistant, Svenja Nesch.
The aim was to develop five separate Muuto concepts for NOISE PR placed around the 1000 squaremetre office. Each of them with various themes, usabilities and Muuto products in focus.
- Flatpacked coffee table in plywood and copper
This project was a design proposals for the competition FSC Design Award 2012.
It is af coffee table inspired from inspired from traditional nesting tables. But for this table the one tabletop is twisted so that the table creates a cross.
The idea is to have two outlets surfaces so you can put your coffee on the lowest and books or electronics at the highest.
The table recieved the FSC design award’s consumer prize in 2012 and the prototype was exhibited at Danish Design Center in Copenhagen from january 2013 to march 2013.
90 degree table is a self-assembly table, where the consumer can assembly the frame and then add on the table tops without tools. The round sticks and fittings are screwed together in threads. The table is therefore suitable for flatpacking and can be packed closely together in a box size 65 x 25 x 5 cm.
- For mobile workers in airport waiting areas
This project was made during a four week collaboration course between Design School Kolding, Tongji University and external partner, Avarte.
The main purpose was to develop a sustainable product in the context of a movable workspace. This project deals with the public waiting areas inside airports, larger trainstations e.i.
The concept “Wait & Work” is designed to give people traveling a posibility to work on a small desk during waiting hours in airports. The 3 core design principles in the design are flexibility, simplicity and ergonomics.
- Fire resistant tent for a sustainable festival
This tent is a result of a former course I had concerning sustainable materials. The task was to explore and research in the field of sustainable materials and develop an idea for some kind of camp with this new knowledge.
I always wanted to make my own tent so I started exploring for the possibility of making a tent in a fire-resistant material for the purpose of making it suitable for festivals. I developed a shape for the tent, which could give new possibilities in building up a camp with tents that could be connected to each other. The hole idea was that the tents should be rental tent that could be booked and arranged in camps when booking the festival ticket. During the projekt I made scale models to communicate the idea.
After the course ended I was lucky to able to continue with my burning desire for building my own tent. I got a collaboration partner, ROCKWOOL, who already was dealing with some residental huts at Roskilde Festival made with insulating materials.
The main material I worked with for my tent was a fabric bade from the volcanic stone, basalt. At last years Roskilde festival i made the first prototype of the tent in 1:1 and I stayed there for 3 days during the festival.
- For desk related work such as drawing and sketching
Angle Light is designed to give the perfect light for desk related work such as drawing, sketching and painting.
The lamp is switched on and crolled by finger touch.
The LED technology with a mix of warm and cold LED diodes allows adjustment of the color temperature of the light according to the secondary light in a room. This ensures thet colors seen in the light of the lamp are seen real.
Angle Light is characterized by its graphic form and the contrast between the general form an the subtracted space at the rear.
Angle Light has one light source, but the luminaire provides three different types of lightning:
Direct - A high efficient light without glare
Indirect - A reflected light from the angled aluminium surface, which reduces shadows from the hand when drawing
Diffuse - A soft light at the rear, which gives a comfortable secondary light in the room
- For operations of the femur
This project was made as a collaboration with the Hospital in Kolding, Sygehus Lillebælt, in attend to improve wellfare of patients and the staff. The project is made together with fellow student Nanna Neergaard.
During observation studies in the orthopedic surgery clinic at the hospital we found a huge challenge in the operation room: an extension boot used for femur operations, that among surgeons were called ‘an object from hell’. It had got that designation because they all found it very difficult to use correct without the risk of causing the the elder patients harms like pressure sores. Therefore the whole staff welcomed our idea about designing a new extension boot.
- Part of ECCO X winter collection
This project was made during a four week
collaboration course between Design School Kolding, D’Wayne Edwards from Pensole Academy, Oregon and Ecco shoes, Denmark.
The project is made together with two fellow students from fashion design Marie Rousing and Louise Permin Tønder.
The intention for this project was to develop a collection of winter products, containing winter boots and a bag, that could make ECCO as brand more attractive to young women in Scandinavia.
With a a design brief based on a consumer profile represented by professional female freestyler skier, Kaya Turski, and the Winter X games as main inspiration, our main purpose was to design a collection of products that represented Kayas professional attitude and passion for skiing in off-hill products.
I designed the the innovative ‘AUTOLACE BOOT’.
- Flashlight and batong for guards and policemen
This project was a collaboration with Würth in the attend to develop their working flashlights. This flashlight is designed for a guard. In addition to serve purely functional as an effective light source it also gives the guard a sense of security because the flashlight can be used as a shield (and a if necessary a weapon) . The flashlight has two light sources; a strongly focused light in front and a broader light source along its shape for illuminating larger areas. The flashlight can be hold in two different ergonomic grips in connection with the operation of the light sources.
- Homemade jewelry pieces made in silver, acrylic and wood
I like to make jewelry and working in silver I’m particularly pleased.
I recently learned how to solder and since then there has been a lot of fine customized rings and earrings added to my collection of jewelry as well as a lot of personal gifts made for friends and family.
I love working in a material as silver which actually is relatively easy to manipulate and shape but at the same time has properties of being really solid and finished in its appearance for final products.
Some of my jewelry work I captured in pictures and these a shown in this gallery.
- A LEGO playground with a lot of possibilities
This project aims to give children the possibility of creating their own playground. The playground has a permanent main shape. Large scale LEGO bricks could easily be added in order to create a personalized environment in which the play could take place. With only a few bricks it is possible to combine and design a whole new playground; a sports car, an airplane, a spaceship, af castle or whatever - there is really no limit to the imagination of a child.
The main inspiration comes from building playgrounds, which unfortunately don't exist anymore, because of stricter safety rules. The building playground gave endless possibilities to build different environment. The LEGO Muoto intends to do the same - just more easily, safer and a lot quicker.
- Bringing together different worlds by play